Follow spot manual

Before replacing the fuse, unplug mains lead. 1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing (anti-clockwise). 2) Remove the old fuse from the fuse holder. 3) Install the new fuse in the fuse holder (only the same type and rating). RoboSpot™. RoboSpot™. Introducing the revolutionary RoboSpot follow spot system, a device that allows follow spot operators to remotely control up to 12 fixtures simultaneously without the safety concerns and impracticality of placing personnel at the top venues such as stadiums, indoor arenas, concert halls, theatres, TV and film sets. Stunning visual displays are now possible with as many as . The Pan/Tilt menu provides a FOLLOW SPOT panel. This panel displays which mechanisms are currently enabled for followspot control (e.g., "intensity," "zoom/iris," "all," "none," etc.) Pressing FOLLOW SPOT brings up the Follow Spot menu.

friction locks are included. The yoke can be mounted on the follow spot head and remain there when the unit is placed in a road box. The 3/ bolt must be tight to prevent the spotlight from shaking on the base or stud. 5. - follow the instructions of this manual When choosing the installation spot, plea se make sure that the device is not exposed to extreme heat, moisture. Combining traditional follow spot functionality with the benefits of LED technology the FSLED uses only 80W of power and features 8 colors, variable strobe speed and dimming capabilities, adjustable Iris, and manual framing shutte.

A ruggedly constructed medium to long throw follow spot, the Comet produces zinc plated steel guide rails, each lens carrier provided with lock knob. instructions before installing or operating this unit. I. ntroduction: The Follow Spot LED is a 2 channel DMX intelligent LED follow spot. The Follow Spot. The Follow Spot LED features variable beam angles between 9° - 14° degrees, Dimmer, 2 Ch. DMX modes, On board Manual Controls, 3-Pin XLR connections to.